Skip To The Main Content

Calibration Bench HC3 / HC4

 
New



Trimos Calibration bench HC3

Trimos Calibration bench HC4

 
               

 
HC3 / HC4

 

Measuring bench for the checking of fixed and variable dimension measuring means. A top range for daily use in workshop or in laboratory.

Horizontal Calibration Instrument for Laboratory



       
 
  

  

Ideal for use in laboratory and workshop

New ergonomic concept

Measuring carriage with fine adjustment

Large range of accessories

Adjustable measuring force (except HC3)

Modular design

Direct measurement over the whole range

 

The Horizon Calibration HC3 and HC4 instruments fulfill today’s requirements of high accuracy quality control equipment in production areas and take into consideration EN ISO 9000 standards.

The instruments may be used in a workshop area or installed in a quality control room for checking of measuring gauges and setting of all types of comparative measuring equipment. The well-designed, reliable new concept, obtained by superior engineering, ensures high precision and optimum results by easy manipulation as well as a valuable level of productivity.

The instrument is equipped with computer, TFT screen and Trimos-WinDHI software.

Instruments with a measuring range from 500 to 3000 mm are available, all of them built in one single piece. All measuring ranges being direct, it means that the whole measuring range is available without adjustment or intermediate re-calibration.
 

Technical Specifications

HC3

500
1000
 1500  2000  3000
Measuring range *
mm 550 1050  1550
 2050
3050 
Max. permissible errors, BMPE 1)   
µm
  0.6+L(mm)/1200
Repeatability, RMPE (2s)
µm 0.1
Maximum resolution
mm
0.00001
Fixed measuring force 
N 0.3 2,3) / 0.5 2,3) / 3
Max. displacement speed mm/s 1500
Operating temperature
°C
 +10 ÷ +40 
Relative humidity
%
 20 ÷ 80
Weight
kg
94
 123 152
181
 239

HC4

500
1000
Measuring range *
mm 550 1050
Max. permissible errors, BMPE 1)   
µm
  0.3+L(mm)/1200
Repeatability, RMPE (2s)
µm 0.1
Maximum resolution
mm
0.00001
Fixed measuring force 
N 0.3 2,3) / 0.5 2,3) / 1 ÷ 12 3)
Max. displacement speed mm/s 1500
Operating temperature
°C
 +10 ÷ +40 
Relative humidity
%
 20 ÷ 80
Weight
kg
94
 123

* The measuring range depends on the anvils used .
1) Values determined at a temperature of 20 ± 0.2 °C and a relative humidity of 50 ± 5 %.
2) With electronic sensor
3) Force display on the WinDHI software window only

Applications

Trimos HS4
Checking of dial gauges (TA-IH-301)

Calibration of plug gauges

Calibration of plug gauges (HPA-1/TULM6/L05/LABC-15)

Calibration of small ring gauges
Calibration of small ring gauges (TA-SU-313/LABC-70/TA-SU-354)
Special design for measurement of large taper threaded gauges

Special design for measurement of large taper threaded gauges

Calibration of thread plug gauges
Calibration of thread plug gauges (HPA-1/TEL6/3O/0.17-3.2/S6.5/LABC-15)

Calibration of external micrometers
Calibration of external micrometers (HPA-1/TULM14)
Comparative checking of gauge blocks < 250mm
Comparative checking of gauge blocks < 250mm (TA-SU-313/TA-SU-305)

Comparative checking of gauge blocks < 250mm
Comparative checking of gauge blocks < 250mm (TA-SU-313, TELMA7/P, TA-SU-305, TA-SU-306) 

Calibration  of 2-point indoor micrometer
Calibration of 2-point indoor micrometers (HPA-1, TELMA7, TELMN7.2)
Checking of test indicators
Checking of test indicators (TULM15)

Checking of taper thread ring gauges
Checking of taper thread ring gauges (HPA-1 / LABC80)