Skip To The Main Content

Laserscanner

Page en construction_DE

Trimos A6 arm laser scanner

For a complex 3D inspection different Laser Scanners can be combined with the Trimos new generation 7 axes arms, the A6. The new configurations offer extremely fast and accurate data collection.
 

Scanner ScanSurf

The new Trimos ScanSurf is our latest solution for scanning measurements and reverse engineering. The perfect companion of your Trimos 7 axes A6 articulated arm.

 
A6 arm with ScanSurf 3D laser
Always ready

With the ScanSurf Scanner there's no need to apply any change from probe to scanner and vice versa. In fact, the probe is mounted on an additional autojoint connector to be always ready for tactile measurements when needed.

 
Large selection

The scanner is available in RED or BLUE light, with sizes from 25 to 100 mm line length at middle range. A great selection to work on any surface and covers any kind of necessity.

Trimos ScanSurf 3D laser scanner

Données techniques

Model A6 + ScanSurf
 EBi (µm)
 EMPE (µm)
 With 25 mm scan  MPE* (µm)
 With 50 mm scan MPE* (µm)

With 100 mm scan

MPE* (µm)
A6-1800-A
 31
 -
 37 66 104
A6-2500-A
 40
 -
 43 69 106
A6-3200-A
 52
 -
 52 75 110
A6-4000-A
 69
 -
 62 82 115
A6-5000-A
 -
 75
 79 96 125
A6-7000-A
 -
 90
 94 108 135
A6-9000-A
 - 170 172 180 197

*Values reported are expressed with 2 σ error. The values are indicative, for Blue and Red line models, and depend on surface quality and properties, surface diffusivity properties and ambient light conditions

ScanSurf
Line length                              mm
 25 / 50 / 100
Laser color         
Red line (660 nm) / Blue line (405 nm)
Connection                   
Renishaw Autojoint
Measuring Arm compatibility
 A6
Laser class
 2M
Max. points acquisition rate     pt/s
 384'000
Max. Points per line (PPL)

1280
Frequency        Hz

Up to 300
Resolution at mid range           µm

25 mm line: 20 µm
50 mm line: 39 µm
100 mm line: 78 µm
Precision                                µm  25 mm line: 26 µm
50 mm line: 60 µm
100 mm line: 100 µm
Protection  IP 50 
Operational Temperature         °C
 +5 ÷ +40
Stockage Temperature °C
 -20 ÷ +70
 Operational Humidity   % 5 without condensation
 Dimensions      mm 115 x 89 x 55
 Software compatibility PolyWorks|Inspector™ & PolyWorks|Modelor™
 CEM requirements

EN 61326-1 :20006-10
DIN EN 55011 :2007-11 (Groupe 1, classe B)
EN 61000-6-2 : 2006-03